NEW

SAFIRE - Gloves For Firefighters

Holík Gloves For Firefighters

About us

Holík America LLC is located in Greensboro, NC. All gloves for the US and Canadian markets are shipped out of Greensboro, NC. Holík America is a sales office of the Czech company Holík International.

The establishment of the Holík International dates back to 1993.
At the beginning the company focused exclusively on the production of work gloves. Over time Holík began to concentrate more on the production of protective gloves and boots for firefighters and special gloves for the army, law enfocement and first responders. Nowadays Holík International exports its products to over fifty countries worldwide and besides the USA, has sales offices around Europe.


Holík Gloves For Firefighters

Structural firefighting gloves

Combine the most advanced materials with top ranked European craft to provide the highest protection, while keeping great comfort and excellent dexterity.

How to measure the glove size ?

  • Anatomical 3D Cut for better grip
  • Perfect fit
  • Excellent dexterity
  • TPP exceeds 60

Indicative guide of glove sizes

The current NFPA 1971:2018 edition vs. the former NFPA 1971:2013 edition.

NFPA sizingSpec sizing
64N XS
64W S / short fingers
64XW M / short fingers *
70N S
70W M
70XW L / short fingers*
76N M / long fingers
76W L
76XW XL / short fingers*
82N L / long fingers
82W XL
82XW 2XL
82XXW 3XL*

Note: words “longer” and “shorter” refer to finger length.
* available on special order

How to measure the glove size ?

Extrication gloves

Provide the highest levels of protection in the most demanding
conditions of technical interventions.

  • High resistance to mechanical risks
  • High strength
  • Breathability – sensitivity – flexibility
  • Anatomical 3D Cut for better grip
  • Perfect fit
  • Reflective elements

Standards

Perfectly functional gloves are the result of a number of work processes that adhere to the following standards and certificates:





Holík Gloves For Firefighters

More About Holík   |   www.holik-international.com   |   www.senspro.cz

Contact Us

Holík America, LLC
3859 Battleground Avenue, STE 112
Greensboro, NC 27410, USA

Cell:
Office::
Web:
1-631-636-9212
1-336-907-8001
www.holik-america.com

All gloves for US and Canadian markets are shipped out of Greensboro, NC.

SAFIRE

SAFIRE - Holík Gloves For Firefighters SAFIRE W - Holík Gloves For Firefighters

Structural firefighting gloves

The Safire gloves result from years of production and development experience. Holik is bringing an all textile fully washable, highly protective gloves that provide great comfort, heat protection and excellent dexterity. “NO EXCUSES”.

Outer shell:
Back: DuPont™ Nomex® fabric combined with ceramic coating. The coating on the back of fingers increases the abrasion resistance and longevity.

Palm: Meta-aramid / para-aramid knitted fabric with silicone coating. Anti-slip reinforcement for secure grip.

Fourchettes (material between fingers): DuPont™ Nomex® fabric.

SAFIRE - Holík Gloves For Firefighters 1. Aramid shell fabric
2. Non-woven aramid fabric
3. PORON®XRD™
4. Porelle® membrane.
5. Aramid lining


Inner layers:


Moisture barrier:


Lining:
Aramid lining with increased thickness – increased heat protection, the lining will not stretch or pull out, easy donning and doffing even when wet. 6. The lining is brushed on reverse side allowing air inside the glove increasing heat protection.

Additional features and benefits:

Available in two colors – navy blue and beige. Both colors come with gauntlet cuff or para-aramid knitted wristlet.

Catalog numbers for The Safire Gloves:


Manufactured in Holik facilities in Europe.
NFPA® is a registered mark of the National Fire Protection Association. PORELLE® is the registered trademark of PIL Membranes Limited. DuPont™ and Kevlar®, Nomex® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company.
Certified by SEI to comply with NFPA 1971, 2018 Edition.

NFPA Certified by SEI to comply with NFPA 1971, 2018 Edition.
NFPA® is a registered mark of the National Fire Protection Association.


Size assortment:

NFPA sizingSpec sizing
64N XS
64W S / short fingers
64XW M / short fingers *
70N S
70W M
70XW L / short fingers*
76N M / long fingers
76W L
76XW XL / short fingers*
82N L / long fingers
82W XL
82XW 2XL
82XXW 3XL*



SAFIRE BEIGE

SAFIRE BEIGE - Holík Gloves For Firefighters SAFIRE BEIGE  W - Holík Gloves For Firefighters

Structural firefighting gloves

The Safire gloves result from years of production and development experience. Holik is bringing an all textile fully washable, highly protective gloves that provide great comfort, heat protection and excellent dexterity. “NO EXCUSES”.

Outer shell:
Back: DuPont™ Nomex® fabric combined with ceramic coating. The coating on the back of fingers increases the abrasion resistance and longevity.

Palm: Meta-aramid / para-aramid knitted fabric with silicone coating. Anti-slip reinforcement for secure grip.

Fourchettes (material between fingers): DuPont™ Nomex® fabric.

SAFIRE - Holík Gloves For Firefighters 1. Aramid shell fabric
2. Non-woven aramid fabric
3. PORON®XRD™
4. Porelle® membrane.
5. Aramid lining


Inner layers:


Moisture barrier:


Lining:
Aramid lining with increased thickness – increased heat protection, the lining will not stretch or pull out, easy donning and doffing even when wet. 6. The lining is brushed on reverse side allowing air inside the glove increasing heat protection.

Additional features and benefits:

Available in two colors – navy blue and beige. Both colors come with gauntlet cuff or para-aramid knitted wristlet.

Catalog numbers for The Safire Gloves:


Manufactured in Holik facilities in Europe.
NFPA® is a registered mark of the National Fire Protection Association. PORELLE® is the registered trademark of PIL Membranes Limited. DuPont™ and Kevlar®, Nomex® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company.
Certified by SEI to comply with NFPA 1971, 2018 Edition.

NFPA Certified by SEI to comply with NFPA 1971, 2018 Edition.
NFPA® is a registered mark of the National Fire Protection Association.


Size assortment:

NFPA sizingSpec sizing
64N XS
64W S / short fingers
64XW M / short fingers *
70N S
70W M
70XW L / short fingers*
76N M / long fingers
76W L
76XW XL / short fingers*
82N L / long fingers
82W XL
82XW 2XL
82XXW 3XL*



PENELOPE Plus

PENELOPE Plus - Holík Gloves For Firefighters

Extrication protective glove with high comfort

The Lesley Plus rescue gloves are designed to offer the highest protection, while keeping great comfort and excellent dexterity.

Outer shell:
Back: Elastic textile – permeable, comfortable
Palm: Goatskin leather with hydrophobic treatment – sensitive, strong, abrasion-resistant

Reinforcements:

Lining:
Knitted lining made of Kevlar® fiber/PES/fiberglass - extra cut resistance, stays permanently attached at fingertips (doesn`t pull out).

Wristband:
Elastic wristband made of neoprene with velcro fastening

Additional features and benefits:

Standards:
EN 420:2003 + A1:2009
EN 388:2003

Protection from mechanical risks (according to EN 388:2003 – level 4 is maximum for abrasion, tear and puncture resistance, level 5 is maximum for cut resistance):

Abrasion resistance Cut resistance Tear resistance Puncture resistance
4 5 4 3

 

Size assortment: XS-S-M-L-XL-2XL-3XL

Catalog number for the Penelope Plus gloves:

DuPont™ and Kevlar®, Nomex® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company.




PONTOS

PONTOS - Holík Gloves For Firefighters

Water Rescue Gloves

Upper material:

Back: Neopren: 2mm, double-sided lamination jersey/jersey – comfortable and elastic

Palm and Between Fingers: microfiber leather 1 mm thick, providing sufficient dexterity, flexibility and mechanical protection

Inner wrist and back of thumb:

Reinforcement:

Additional features and benefits:

Size assortment: S-M-L-XL-2XL




BRENNA

BRENNA - Holík Gloves For Firefighters BRENNA W - Holík Gloves For Firefighters

BRENNA Gauntlet 8081 / BRENNA Wristlet 8082

Structural firefighting gloves

Outer shell

Back: Split cowhide leather, black

Palm: Grain cowhide leather, black

Fourchettes - material between fingers: Grain cowhide leather, beige
The leather is specially treated for a heat, water and abrasion resistance, yet remains very flexible.

 

Inner layers

Moisture barrier
Porelle® P540 polyurethane FR membrane

Lining
Aramid lining with increased thickness

 

Additional information 

Available in 2 styles – gauntlet cuff or para-aramid knitted wristlet.

NFPA Certified by SEI to comply with NFPA 1971, 2018 Edition.
NFPA® is a registered mark of the National Fire Protection Association.

Manufactured in Holik facilities in Europe.

 

Size assortment:

NFPA sizing Spec sizing
64N XS
64W S / short fingers
64XW M / short fingers *
70N S
70W M
70XW L / short fingers*
76N M / long fingers
76W L
76XW XL / short fingers*
82N L / long fingers
82W XL
82XW 2XL
82XXW 3XL*

Note: words “longer” and “shorter” refer to finger length.
* available on special order

How to measure the glove size ?




TARREN

TARREN - Holík Gloves For Firefighters TARREN W - Holík Gloves For Firefighters

TARREN Gauntlet 8078/ TARREN Wristlet 8079

Structural firefighting gloves

Outer shell

Back – Palm – Fourchettes:
Split cowhide leather

Inner layers

Moisture barrier

Porelle® P540 polyurethane FR membrane

Lining
Aramid lining with increased thickness

 

Additional information 

Available in 2 styles – gauntlet cuff or para-aramid knitted wristlet.

NFPA Certified by SEI to comply with NFPA 1971, 2018 Edition.
NFPA® is a registered mark of the National Fire Protection Association.

Manufactured in Holik facilities in Europe.

Size assortment:

NFPA sizing Spec sizing
64N XS
64W S / short fingers
64XW M / short fingers *
70N S
70W M
70XW L / short fingers*
76N M / long fingers
76W L
76XW XL / short fingers*
82N L / long fingers
82W XL
82XW 2XL
82XXW 3XL*

Note: words “longer” and “shorter” refer to finger length.
* available on special order

How to measure the glove size ?




MIWA

MIWA - Holík Gloves For Firefighters

Extrication highly protective glove

Outer shell

Back: Elastic textile, color Lime Green – permeable, comfortable

Palm including fingers: Elastic knitting made with DuPont Kevlar® fiber/PA with FR coating and foam filling in the palm area

Fourchettes - material between fingers: Elastic textile

 

Reinforcement

Lining

Wristband

Additional information

 

EN 388:2016 Abrasion resistance Cut resistance Tear resistance Puncture resistance Cut resistance TDM Impact protection on the back
Palm 4 5 4 3 D X
Back 4 5 4 3 X P

 

Protection from mechanical risks - according to EN 388:2016
level 4 is maximum for abrasion, tear and puncture resistance
level 5 is maximum for cut resistance
level F is maximum for cut resistance TDM – according EN 388 4.1.
P – pass – Impact protection on the back – according EN 388 4.2.2.

 

Size assortment:
XS – S – M – L –XL – 2XL – 3XL
DuPont and Kevlar® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company.




LESLEY Plus

LESLEY Plus - Holík Gloves For Firefighters

Extrication highly protective glove

Outer shell

Back: Elastic textile, color Lime Green – permeable, comfortable

Palm including fingers: Synthetic leather – sensitive, strong, abrasion-resistant

Reinforcement

Lining - Palm:

Wristband

Additional information

 

EN 388:2003 Abrasion resistance Cut resistance Tear resistance Puncture resistance Cut resistance TDM Impact protection on the back
Palm 4 5 4 4 D P

 

Protection from mechanical risks - according to EN 388:2003
level 4 is maximum for abrasion, tear and puncture resistance
level 5 is maximum for cut resistance
level F is maximum for cut resistance TDM – according EN 388 4.1.
P – pass – Impact protection on the back – according EN 388 4.2.2.

 

Size assortment:
XS – S – M – L –XL – 2XL – 3XL
DuPont and Kevlar® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company.




TAIPA

TAIPA - Holík Gloves For Firefighters

Extrication highly protective glove

Outer shell

Back: Elastic textile, color yellow - permeable, comfortable
Neoprene hemmed by reflective element – knuckle protection on the back of the hand

Palm: Synthetic leather – sensitive, strong, abrasion-resistant

Fourchettes - material between fingers: Elastic textile

Reinforcement

Lining

Wristband

Additional information

 

EN 388:2003 Abrasion resistance Cut resistance Tear resistance Puncture resistance
Palm 3 2 4 3

 

Protection from mechanical risks - according to EN 388:2003
level 4 is maximum for abrasion, tear and puncture resistance
level 5 is maximum for cut resistance

 

Size assortment:
XS – S – M – L –XL – 2XL – 3XL




How to measure the glove size


For selection of the proper glove size, hand shall be measured as follows:

Measure your index finger from the palm crease to the tip in millimeters and this will give you the closest numerical size.
The “size“ (number) is the length of the index finger in millimeters.

Now measure across the top of your knuckles. “N“ (normal) or “W“ (wide) is the palm width.

How to measure the glove size

Find the corresponding size/width based on the chart below.
Example: Size “76N“

Holík NFPA 1971, 2018 edition sizing

Holík NFPA 1971, 2018 edition sizing

Indicative guide of glove sizes

NFPA sizingSpec sizing
64N XS
64W S / short fingers
64XW M / short fingers *
70N S
70W M
70XW L / short fingers*
76N M / long fingers
76W L
76XW XL / short fingers*
82N L / long fingers
82W XL
82XW 2XL
82XXW 3XL*

Note: words “longer” and “shorter” refer to finger length.
* available on special order

Close Top